High Quality Water Spray Retort /Sterilizer/Autoclave for Coffee (Two Pieces Aluminium Can /Glass Berverage

• After-sales Service: 1 Year
• Warranty: 1 Year
• Condition: New
• Customized: Customized
• Voltage: 380V
• Composition: Sterilization Equipment
• Model NO.: DTS-P-X1302
• Processing Material: S.S. 304 Metals
• Process: Thermal Processing
• Design Pressure: 3.5 Bar
• Design Temperature: 147 Degree
• Control System: D-Top System
• PRO. Capacity: 360 Sets/Year
• Transport Package: Naked and Wooden Cases
• Specification: 1600 mm with 4 baskets
• Trademark: DTS
• Origin: China
• HS Code: 8419899090
• Production Capacity: 360 Sets/Year

Product Description

 

Product Description

1).When the sterilization process is started, preheated process water is injected into the retort.
2). Come up and holding:
When the retort inner water level reaches the setting point, the circulating begins, and the water is heated by steam indirectly through the heat exchanger.
3).The thermal replacement at the initial cooling phase:
Through water pump, the process water in cold water tank is injected into the heat exchanger to cool the products in the retort, and the hot water above 80ºC from the heat exchanger is collected to the hot water tank and used as the sterilization process water.

 Advantages
 

1. Uniform water flow distribution
By switching the water flow direction in the retort vessel, uniform water flow is achieved at any position in the vertical and horizontal directions. An ideal system for dispersing water to the center of each product tray to achieve uniform sterilization without dead ends.
2. High temperature short time treatment
High temperature short time sterilization can be performed by heating hot water in a hot water tank in advance and heating from high temperature to sterilize.
3. Suitable for easily deformed containers
Because water has buoyancy, it can form a very good protective effect on the container under high temperature state.
4. Suitable for handling large packaging canned food
It is difficult to heat and sterilize the central part of large canned food in a short time by using a stationary retort, especially for food with high viscosity.
 

Standard Configuration
Serial No.	Pump valve	Brand
1	Water pump	East
2	Pneumatic butterfly valve	Bray
3	Pneumatic diaphragm control valve	Spirax Sarco
4	Pneumatic angle seat valve	Burk ERT
6	Safety valve	Spirax Sarco
7	Filter valve	Spirax Sarco
8	Check valve	Spirax Sarco
Serial No.	Main configuration	Brand
1	Heat exchanger	DTS
2	Breaker	French Schn EIDER
3	Contactor	French Schn EIDER
4	Power light	Siemens
6	Relay	Siemens
7	Human-computer interface	Siemens
8	PLC	Siemens
11	Pressure sensor	Switzerland HUBA
12	Temperature sensor	IFM
14	Magnetic flap level gauge	Dongrun
15	Control cabinet	DTS

Certificates

Retort is designed and produced according to the requirements of GB150-2011 <steel pressure vessel manufacturing standard>. DTS is identified and has passed through ISO9001, ISO14001 system authentication and also passed the CE, America ASME as well as SGS, TUV, BV, EAC rated.

1. Equipment is designed according to the GMP and FDA requirements.
2. If the cycle is based on the temperature data given by the cold spot location, if all products loaded have the same contamination level, we guarantee the less than 1/1,000,000 bags contamination.

Enterprise Culture

During 22 year, DTS people keep striving for excellence, and we have accumulated rich experience in sterilization area, and created excellent enterprise culture in company management and toughened a united and aggressive team.

FAT