Sides Water Spray Retort/Sterilizer/Autoclave for Seafood in Flexible Bags

• Condition: New
• Customized: Customized
• Voltage: Customized
• Composition: Sterilization Equipment
• Process: Thermal Processing
• Warranty: 1 Year
• Model NO.: DTS-C
• Heat Exchanger: Spiral-Tube Heat Exchanger
• Design Pressure: 3.5 Bar
• Design Temperature: 147 Degree
• Trademark: DTS
• Origin: China
• HS Code: 8419899090
• Production Capacity: 300 Sets/Year

Product Description

Detailed Photos

Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is sprayed onto the product through the water pump and the nozzles distributed at the four corners of each retort tray to achieve the purpose of sterilization. It guarantees the uniformity of the temperature during the heating and cooling stages, and is especially suitable for products packed in soft bags, especially suitable to the heat-sensitive products.

Product Parameters

Model	Effective diameter	Effective length	Dimension			Qty of food baskets	Design Temperature	Design Pressure
			L	W	H
DTSC/10-2	1000	1800	3500	1600	2200	2	147ºC	3.5bar
DTSC/10-3	1000	2400	4471	1684	2484	3
DTSC/12-3	1200	2400	3149	1852	2177	3
DTSC/12-4	1200	3600	4362	1894	2726	4
DTSC/12-5	1200	4500	5408	2550	3393	5

Our Advantages

1. Accurate temperature control, excellent heat distribution
The temperature control module (D-TOP system) developed by DTS has up to 12 stages of temperature control, and the step or linearity can be selected according to different product and process recipe heating modes, so that the repeatability and stability between batches of products are maximized well, the temperature can be controlled within ±0.5ºC.

2. Perfect pressure control, suitable for a variety of packaging forms
The pressure control module (D-TOP system) developed by DTS continuously adjusts the pressure throughout the whole process to adapt the internal pressure changes of the product packaging, so that the degree of deformation of the product packaging is minimized, regardless of the rigid container of tin cans, aluminum cans or plastic bottles, plastic boxes or flexible containers can be easily satisfied, and the pressure can be controlled within ±0.05Bar.

3. Highly clean product packaging
The heat exchanger is used for indirect heating and cooling, so that the steam and cooling water are not in contact with the process water. The impurities in the steam and cooling water will not be brought to the sterilization retort, which avoids the secondary pollution of the product and does not require water treatment chemicals (No need to add chlorine), and the service life of the heat exchanger is also greatly extended.

4. Compliant with FDA/USDA certificate
DTS has experienced thermal verification experts and is a member of IFTPS in the United States. It fully cooperates with FDA-approved third-party thermal verification agencies. The experience of many North American customers has made DTS familiar with FDA/USDA regulatory requirements and cutting-edge sterilization technology.

5. Energy saving and environmental protection
A small amount of process water is quickly circulated to quickly reach the predetermined sterilization temperature. Low noise, create a quiet and comfortable working environment. Unlike pure steam sterilization, there is no need to vent before heating, which greatly saves steam loss and saves about 30% of steam.

6. Maintenance cycle and time alarm
For main valves, we set the maintenance cycle and time in the PLC, when it arrives, there will be alarm appear to notice.

7. Spiral-tube heat exchanger

DTS self-studied and produced spiral heat exchanger, inside tube material is stainless steel 316,  no need to replace the rubber gasket, no need maintenance, corrosion resistance, and have a long service life. DTS has patent of it in China.

8. Full automatic linear control system

   DTS self-studied patented technology D-TOP system can be sensitive to temperature. It can automatically calculate the pressure changes inside the container according to the temperature. And then automatically adjust the pressure inside the retort to get the pressure balance between container internal and external. So it can prevent the package's deformation, keep the package shape. Pressure was controlled in + / - 0.05 bar with compressed air intake valve and exhaust valve.

9. Double pressure control

Two pressure sensors work at the same time, contrast each other, for real-time monitoring of pressure. When there is a failure, another work automatically, to ensure normal operation of equipment.

Oversea Service System

Packaging & Shipping

Certifications

Company Profile